Armageddon Dust 24ml (Technical) Hot on Sale
$3.90New 2016
Showing 33–48 of 718 results
-
ArmsKeeper Glues Accessories: Extra Fine Extender Tips (6) Online Sale
$2.50For use over the standard #05312 top, it allows ArmsKeeper s thin CAs (Insta-Cure, Insta-Flex and Super-Gold) to be applied a drop at a time. Thin CA tends to run everywhere, so these allow precise application.
-
ArmsKeeper Glues Accessories: Extra Long Extender Tips (6) For Sale
$1For use over the standard #05312 top, they provide a rigid tip with extended length to get thin and gap filling CA into hard to reach areas. They are very resistant to clogging and can be cleaned by soaking in acetone.
-
ArmsKeeper Glues: Insta-Cure Super Thin (.5 oz.) on Sale
$3INSTA-CURE� has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a…
-
ArmsKeeper Glues: Insta-Cure Super Thin (1 oz.) Cheap
$3.40INSTA-CURE� has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a…
-
ArmsKeeper Glues: Insta-Cure Super Thin (2 oz.) Discount
$5.50INSTA-CURE� has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a…
-
ArmsKeeper Glues: Insta-Cure+ Gap Filling (.5 oz.) For Cheap
$3INSTA-CURE+� is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ �…
-
ArmsKeeper Glues: Insta-Cure+ Gap Filling (1 oz.) Sale
$3.50INSTA-CURE+� is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ �…
-
ArmsKeeper Glues: Insta-Cure+ Gap Filling (2 oz.) on Sale
$5.50INSTA-CURE+� is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ �…
-
ArmsKeeper Glues: Insta-Set Accelerator (2 fl. oz.) on Sale
$3.50INSTA-SET� is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET� in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a…
-
ArmsKeeper Glues: Maxi-Cure Extra Thick (.5 oz.) For Discount
$3MAXI-CURE� extra thick CA is the best CA for most plastics, including GE�s Lexan MAXI-CURE� is the best choice for plastic model assembly. When used with INSTA-SET�, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a…
-
ArmsKeeper Glues: Maxi-Cure Extra Thick (1 oz.) Fashion
$3.40MAXI-CURE� extra thick CA is the best CA for most plastics, including GE�s Lexan MAXI-CURE� is the best choice for plastic model assembly. When used with INSTA-SET�, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a…
-
ArmsKeeper Glues: Maxi-Cure Extra Thick (2 oz.) Online
$5.50MAXI-CURE� extra thick CA is the best CA for most plastics, including GE�s Lexan MAXI-CURE� is the best choice for plastic model assembly. When used with INSTA-SET�, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a…
-
ArmsKeeper Glues: Maxi-Cure Pocket CA (.75 oz.) on Sale
$3ArmsKeeper has introduced a new 3 4 oz. size for our cyanoacrylates. The Pocket CAs feature a new top that has a pin built into the cap that covers the nozzle. This pin seals the bottle so that if it is tipped over, the bottle will not leak. This makes the Pocket CAs ideal for…
-
Artificer Layer Brush Online Hot Sale
$14.13Made from the highest-quality sable hair, the Artificer range are the best layering brushes money can buy. Supplied with a plastic tube to guard it against the elements when not in use, the S Layer Artificer brush can really help you achieve results you didn’t think you were capable of. Ideal for the smaller details…
-
Astorath Red 12ml (Dry) Cheap
$2.28Citadel Dry Compounds are of a thicker consistency than other Citadel paints, which makes them perfect for drybrushing – a handy way to pick out the details on a model, or apply highlights swiftly and easily. All of our paints are non-toxic, water-based acrylic that are designed for use on plastic, metal, and resin Citadel…
End of content
End of content